PKW SMART offline programming with MB Star Xentry

Here is some files and tips on offline programming for Mercedes PKW/SMART by MB technician.
vehicles: PKW/SMART
Software: Xentry XP, XDOS(32/64) and Xentry Pass-Thru (32/64)
Release: 2015 until 07-2016.

Device: the updated firmware SD connect c5 or SD connect c4

ps:
- i don't password it because it is for educational only.
- do at your own risk
- no support but if i get your valuable feedback, i will try to fix it if i could.
- you can't combine with online capabilities of the latest xdos. better make a batch file to switch between offline and online.
it is simple because it is only one folder..

e.g:
- copy your original das\trees\pkw\flashen and rename to e.g: flashenOnline
- extract the offline patch to the flashen folder

so you have 2 folders.
1. flashen (with offline capability)
2. flashenOnline which is the original

make one click batch file to change between them when needed.

here it is:

Xentry Offline Programmi…7-2016.rar

https://mega.nz/#!r1YlwLKD!J3dIGGOuov0eVIa6BLJiikFb3BXBBzpxnAaDhQZqf04

notes:
- for some xdos release, there is no akttab.csv in the PKW sdflash folder

here it is:

akttab.csv

https://mega.nz/#!x81mzJ5I!sJF4_i3vQFKBzyi6FJC73w-HcLGEz8W3sBazhcYvhZA

Disclaimer：

offline programming software (safe database) - tested working by the MBSTARSHOP chief engineer:

http://www.mbstartool.com/wholesale/latest-version-mb-star-c3-c4-software-hdd.html

Special thanks for Satria sharing all above at forum autoprofessionals.org.

http://blog.mbstartool.com/2016/08/01/pkw-smart-offline-programming-with-xentry/