7.25.2016

MB Star C3 Xentry Fault(1.2)-2.503.13003 Initialization failed

Files c32s.dll and CAL 872 fix can solve Xentry/DAS Fault(1.2)-2.503.13003 “Initialization of diagnosis multiplexer failed”, said users with Chinese MB STAR C3 diagnostic tool.

Multiplexer:
Chinese MB Star C3

Error message:
"Fault(1.2)-2.503.13003
Initialization of diagnosis multiplexer failed
Possible causes:
The link between the diagnosis multiplexer an the
diagnostic socket is interrupted
The link between the diagnosis multiplrxer an the
diagnostic unit is interrupted.
The voltage supply at the diagnostic socket (circuit30
and(or) circuit31)is fault.
Note:
When using SDconnect, check the connection status
using the Toolkit. ”

mb-star-c3-xentry-fault-1.2-1
mb-star-c3-xentry-fault-1.2-2

Analysis from Mbstartool engineers:
“your STAR C3 mux is not connected in a proper condition. Check the connection first, with your car and laptop”

Disclaimer:
Solutions below are offered by users. TRY ON YOUR OWN RISK.

Solutions from ZCC
Software version: DAS 07/2011
Free download c32s.dll & CAL 872 fix (872 fix is copyrighted)

Finally I solved this problem.
It was really a complex combination of faulty hardware and software. I had a problem with that annoying c32s.dll file. I replaced it with the original 01/2011 one plus I used CAL 872 fix version 2 for DAS 07/2011 onwards. Only the c32s.dll solved the problem.
Solutions from fadiboujaoude
Software version: Das Xentry 01 2012
Free download oldc3.rar:

Solved my problem with the following tips...
  1. download and set the das32R2(032012)
    2. get the c32s.dll of das xentry 01 2012 and replace the existing one in F:/programme/Das/Bin
    3.replace the HHTWin.ini located in c:\Windows :
    (Copy And paste the lines below And exit and save HHTWin.ini File)
    [STARTUP]
    DX=515
    DY=510
    X=110
    Y=0
    BACK=21
    SLAVE=PARTD2
    DEBOUT=1
    DEBLVL=6
    SPC=02
    SPCN=02
    SPCP=02
    SPCD=02
    SPCV=02
    [STARCONF]
    BMPPATH=C:\USERDATA\Docs\HHT\
    MAXFILES=200
    DEBOUT=1
    DEBLVL=6
    [Debug]
    HHTWIN.exe-modpath=F:\PROGRA~1\HHT\PKW\
    HHTWIN.exe-szIniFile=C:\WINNT\HHTWIN.ini
    HHTWIN.exe-lpszCmdLine=
    HHTWIN.exe-Parameter=Inifile
    HHTWIN.exe-szParamsPath=C:\userdata\CSD\Writefil\HHTWIN_Params.ini
    HHTWIN.exe-CmdParams=
    HHTWINX.DLL-modpath=F:\PROGRA~1\HHT\PKW\
    HHTWINX.DLL-szIniFile=C:\WINNT\HHTWIN.ini
    4.search on this forum for the file oldc3 ... extract it .. then run it..
    5. Done
    this is the only way i got my DAS to read my multiplexer
Wish this help!

(PS: sorry for that i didn’t mention all the authors which i read their threads and posts but this because i read a lot and i did many and many tries to finally have the solution)

Star C3 software of High quality:

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.