How to install MB SD Connect 4 battery and wifi card

If you've got the brand new Mercedes Benz MB SD Connect Compact 4 Diagnostic System, the first step you have to do is to install rechargeable batteries. Here is the detailed instruction on installing MB SD C4 batteries.

1. Please prepare the following tools:
 
①--- SD connect multiplexer which need to input the batteries。
②--- 6 units Ni-MH Rechargeable batteries，Size：AA， Voltage：1.2V， Capacity：above 1700mA。
③--- 1 unit 108M WIFI Card。
④--- Plum screwdriver，Specification：T-20

2.Take out the rubber:
2.1 Use the T20 Plum screwdriver to take out the screws as below.
 

2.2 Take out the rubber as below.
 
①--- Batteries Space.
②--- WIFI Card Space.
③--- SD Card Space.

3. Insert the Rechargeable batteries.
3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.
 

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.
 

3.3 Insert the batteries. Note the Battery polarity.
 

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
 

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.
 


4. Installing WIFI Card.
4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.
 
4.2 Push it to make it totally connected.
 
4.3 Cover the rubber and fix the screws to finish all the work.
 

That's all about how to install MB SD Connect C4 diagnosis

The newest  MB SD Connect 4 wireless Star diagnosis with V2016.07software HDD has been come out. 
http://www.mbstartool.com/upload/service/mb-sd-c4-firmware-update-first-steps-for-installing-battery.pdf