DAS not recognize all ECUs through 38 pin cable solution

DAS is working perfect on any car with the 16 pin cable and Xentry also is working perfect. But when DAS is connecting with the w210 car through 38 pin cable, DAS only recognize 3 ECUs then nothing, i changed the 38pin cable gives me the same result.


i used windows7 ultimate x64bit with Xentry openshell 5.2016, all patches and fixes are applied.



I changed the old cable with another HQ 38 pin cable, but the same problem!

tried on different car, same problem,
same car tested on old system (MUX MB Star C3 + Windows XP) works perfect



HHT-win system, simply a message said:" HHT-WIN is not available on this system"
but as per the photo only few ECUs are detected, then nothing....





User suggestion on this topic:

Depends on which W210 it is facelift or pre-facelift with FBS3 or older system? For facelift version have to working shortest through DAS. Pre-facelift version/older model is automatically switched to HHTWin. For example as I remember W168 model year 2003-2004? /I forgot/ is full short test in DAS and then if you click on some ecus then is switched to HHTWin. Facelift W210 model have to working full short test in DAS. This is not HHTWin problem. Maybe your hardware have problem with connection to older cars.



Professional advice from mbstartool engineer:

It’s normal. DAS / HHTWin does recognize some ECUs only through 38 pin cable. And there is not ECUs in old cars as many as new cars.



On a side note, no need 38 pin cable if obd connection is ok

http://blog.mbstartool.com/2016/10/24/solved-das-not-recognize-all-ecus-through-38-pin-cable/