How to Disable Benz AXOR Truck AdBlue with MB Star DAS?

Here's the guide on how to disable AdBlue for Mercedes Benz AXOR 375.4 truck using MB Star diagnostic software DAS.

 

Preparations:

Benz DAS Diagnostic Software (older version)

MB Star SD Connect C4 multiplexer 

Benz FDOK VeDoc & Special Functions Calculator 

 

Procedures:

Note: Here test this function in the simulation mode

Connect DAS diagnostic interface to Benz truck,it is 16 pin connector

Then enter menu to select “Truck”–>”AXOR”–>”AXOR 375.4”

Select “System recognition”

Select “FR driver control”–>”Control unit adaptations”

Select “Vehicle parameter”

Select “NOx Torque limit”

Select “100% of maximum torque for vehicle”

Then it will show you

Random number:0131

ID Code:13121110

Calculation type:XT

Now run Benz FDK VeDoc calculator software,input the random number,ID code and calculation type,then you will get the two codes.

Now input the Old result:181-212-092-025

Click continue,it will show you with message below

Now AdBlue have been removed

Done!

www.obdii365.com

How to Activate 2020.06 MB Star Xentry Software?

2020.06 MB Star Xentry diagnostic OpenShell (Windows 7/Windows 10 optional) has been tested and verified working no issue.  Activation is required before hooking it up to work.

 

 

Software Including: 

Xentry OpenShell 2020.06

WIS/EPC 11.2018

HHT-WIN

DTS Monaco 8.13

Vediamo

SDMedia

StarFinder 2016

PL73 etc

 

XENTRY Diagnostic OpenShell devices:

– MB SD Connect C4

– MB SD Connect C5
– XENTRY VCI
– eCOM

*Don’t support offline programming.  Online programming need luck.

How to Activate 06.2020 MB Star Xentry & DTS?

Open ConfigAssist on desktop

Copy Hardware ID to Notepad

Open the DTS Monaco 8.13 software on desktop, it will automatically show DTS ID

Copy the ID to Notepad

Send both Hardware and DTS ID to obdii365.com customer service

We’ll send to activation file.

Open the activation file and Copy the ID inside

In ConfigAssist, select StartKey->Manual 

Paste xentry activation key here and Save

Xentry activation completed.

Open the activation zip file

Copy the files inside

Paste all these files to C/Program Files/Softing/Diagnostic Tool Set 8/8.13 to activate DTS Monaco

How to Activate 06.2020 MB Star EPC/WIS?

Open EWA on desktop

Enter User: admin and password: 12345

Copy LAN-ID here

Open CarProKey program

Select EPCnet/WISnet program

Paste LAN-ID and generate activation key for EPC WIS

Paste EPC WIS registration key

Copy and paste each into the activation box. And then Save

WIS EPC software activation completed.

Now you can connect sd c4/c5 and set IP to use.

Check video guide, including how to set up IP address.

http://blog.obdii365.com/2020/08/06/activate-2020-06-xentry-openshell-wis-epc/

MB Star 2020.03 EWA activation unknown id solution

Have mb star sdconnect c4 2020.03 (both SSD & HDD version), when enter ewa-net to activate, get error ” unknown id”. How to fix?

Here’s the working solution:

Enter the Device Manager, uninstall the hidden NIC driver, restart ewa-net. (If you have no idea which are the virtual network card drivers that need to be uninstalled, Find the ones with # to uninstall.

Look at the images below to follow:

mb sd connect c4 2020.03 tech support: www.obdii365.com

How to Virgin ME2.8 ECU and Code with MB Star DAS?

ME 2.8 ECUs are used in many Mercedes Benz models with M112/3 engines.  The old ECU is damaged. You need to make virgin (renew it) and code it by MB Star diagnostic DAS or Vediamo.

Part 1: Renew ME 2.8 with CGDI MB

Remove ME 2.8 ECU from MB (i.e a W203)

CGDI Prog MB software 3.0.2.0 adds the ME2.8 ECU wiring diagram

Follow wiring diagram to connect MB Bosch ME 2.8 ECU with CGDI

Run CGDI MB software

Select Auto Computer function
Read ECU

Get erase password

Get erase password success.

Press Erase 

Erase/Renew ECU completed

Re-Install ME 2.8 ECU back to vehicle

Part 2: Adapt ME 2.8 with DAS
Using MB Star Xentry to program a virgin ECU to an existing EIS.
Connect MB SD Connect C4 multiplexer with vehicle via OBD socket via LAN cable
Turn on ignition switch

Identify vehicle
Select Control Unit Groups-> Drive->ME2-SFI- Motor electronics-> ME-SFI 2.8-Motor electronics 2.8-> Control Unit adaptation->Learning processes

Teach in of drive authorization system

Press F1 to continue

Enter VIN as 17-digit code

Personalizing
Switch off ignition and then switch on

Start the engine

Personalizing in process, wait about 30s

Is this engine control module to remain fitted in the vehicle?
Press Yes to continue

The engine control module is irrevocably assigned to the vehicle.
Do you wish to activate control module ME-SFI 2.8?

Press Yes to continue

Activating module in process

The learning process has been performed.

The ME 2.8 ECU virgin ME adaption learning process is completed.

www.obdii365.com

https://www.obdii365.com/service/virgin-me-28-ecu-by-cgdi-and-adapt-with-das.html