How to set the settings for the Chinese DOIP kit or the SD Connect DOIP Plus working with DTS Monaco or XENTRY?
Here is the MB SD C4 Plus DoIP Kit
The following settings work both as the DoIP kit below and the C4 DoIP Plus multiplexer.
Both have been tested.
The LAN setup works for both DTS and Xentry.
Example DTS 8.16.015.
What is important is that the DTS license is original and not a patched one.
See the next steps in DTS
Problem:
I managed to resolve an annoying communication error (99.58642.0) that I have been experiencing for a while when trying to scan certain vehicle models using XENTRY Pass Thru 23.6.3 with my Tactrix Openport 2.0 and GODIAG GD101 PassThru devices. E.g. my A45 AMG W176 would always throw Communication Error 99.58642.0 when trying to scan it.
If you have DTS9 installed on the same machine as XENTRY Pass Thru and
have also imported the 'PassThruSupport' regkeys that have been provided
on mhhauto and elsewhere so that DTS9 can recognise your PassThru VCI,
then that is the cause of the this XENTRY Pass Thru communication error.
The DTS9 PassThru VCI regkeys floating around on here and elsewhere are
basically just
exports from "HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04"
and then re-imported
to "HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04" which allows DTS9
to recognise the PassThru VCI so it can be added as a VCI within the
DTS9 settings.
The problem with these copied keys is that they seem to conflict with
each other due to having the same key names (for some weird reason),
regardless of them being in different registry locations.
Solution:
They were the cause of my XENTRY Pass Thru Communication Error 99.58642.0, and here is what I did to fix it:
1. Open Regedit and navigate
to "HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04" and you will
notice your PassThru VCI name as one of its subkeys. This is the
location that DTS9 looks at when identifying PassThru devices.
2. Rename your PassThru VCI subkey. E.g. I renamed 'Tactrix Inc. -
OpenPort 2.0 J2534 ISO/CAN/VPW/PWM' to 'Tactrix Inc. DTS - OpenPort 2.0
J2534 ISO/CAN/VPW/PWM'. You do not need to rename anything that sits
under this subkey.
Doing this for each PassThru VCI that I use with both DTS9 and XENTRY
Pass Thru has resolved the Communication Error 99.58642.0 that I was
getting when trying to scan some models using my PassThru devices
with XENTRY Pass Thru 23.6.3.
I replicated this conflict by re-adding the DTS9 PassThru regkeys shared
on here and elsewhere and the error re-appeared, then manually renamed
them again (as above) and the error vanished.
Hope this helps someone.
Free download
Here you can download MB Star SD Connect C4/C5 Xentry offline login gadget to log in xentry offline (with network connection).
What does this give us? Why need this?
You can use XENTRY offline with Internet Connection (don’t Need disable).
If you don’t need online at all, you don’t need that window either, but if you use it and then want to log in, you won’t be able to, it’s perfect for 100% offline systems, without packaging however there are other solutions that avoid having to close it since it will not appear but you can log in at any time.
Thanks sascha & cloud9atom for your contribution.
For Xentry before 2021.06
Download Xentry Login Offline Gadget here- Xentry Offline Setup.
This works only as offline Version, now with Internet Connection.
1. unpack zip file
2. start setup
3. Go to C:\ProgramData\Mercedes-Benz\config\Xentry and make offline file read only
4. Login with Name: xentry pass: 123456
Click on offline and then you can login.
Click on online, then offline modus is off.
This should work till end of 2025.
Make sure it is read only, without read only and you have later date,
It will delete the login.
Q1: It works only once, after not taking the login and password.
A1: After deinstallation and cleaning of the registry, installed again and everything worked.
Q2: after starting Offline_modus app, in opened window i see “A duplicate file name exists, or the file cannot be found”
A2: copy offline.properties file from C:\ProgramData\Mercedes-Benz\config\Xentry to C:\ProgramData\Mercedes-Benz\config\XD_DT and C:\Program Files (x86)\Mercedes-Benz\Xentry\XD_MB
Q3: This work for diagnostic 2021 2022 w206, w213, w223?
A3: No, For those vehicles you need a Zenzefi certificate in addition to logging in “offline”
Starting with 2021.09 you can use this fix.
This only works if Xentry is installed in C, not other partitions
Instructions:
1. Place License+Login+Blacklist Fix in C so it looks like this C:\License+Login+Blacklist Fix
2. Run Install.bat as administrator
3. Copy ProgramData and Program Files (x86) from C:\License+Login+Blacklist Fix folder to C:\ , click on replace files
4. Copy lic_key_2.dat from C:\ProgramData\LicDir to C:\License+Login+Blacklist Fix folder
5. Login with user xentry and password 123456
Software overwrites it and No authorization error will appear in case you didn’t use .x4711 activation method aswell, it s only for the activation, you can delete that line if you want.
Q: Where from download these “lic_key_2.dat” special?
A: It is in your computer already, location is C:\ProgramData\LicDir
Put the good lic_key_2.dat in the root of C: drive.
FYI: If need to cancel login function of Xentry, do following:
Here is a way:
1, c:\Program Files (x86)\Mercedes-Benz\Xentry\bin
2, open file the XentryServices.xml by wordpad.
3, deleted content as below:
<service name=”LoginService” interface=”com.dcx.indiaes.service.interfaces.login.LoginService” implementor=”com.dcx.indiaes.service.login.LoginServiceImpl” />
4, save it.
5, restart Xentry.
enjoy!
How-to: create a DoIP connection with a BMW ENET cable on Mercedes Benz DTS Monaco engineering software.
Configuration:
Bus System Interface:D-PDU API
D-PDU API Version: Berner and Mattner Systemtechnik GmbH GDPM_UNIT
Module Type: MVCI_ISO_13400_DOIP
Vendor Module Name: —-
Cable: CABLE_PART_F_ECOM
– Physical links
IEE_802_3: Ethernet 1
*This configuration requires DTS Monaco freshly installed and no other BMW VW or vpn Software etc in that pc, straight away it work.
Successfully flashed multiple HU5S1 Head units on w205,w212 W117 etc by dts monaco without a problem. So try at your own risk.
Another configuration works too.
Bus System Interface: D-PDU API
D-PDU API Version: Softing AG EDIC_D_PDU_API_xx_xx_xxx (any version)
Module Type: MVCI_ISO_13400_DOIP_Collection
Vendor Module Name: —-
Cable: Ethernet_Cable
– Physical links
IEE_802_3: Ethernet 1
Note:
For BMW connection IP Address must be set but for Doing working on Mercedes IP address must be automatic.
A lot of people are asking for license DTS Monaco 9.02 engineering software. Here you can do it by yourself with tutorial
Software is not included. Here you can download free DTS 9. Free to test by your side.
Free Download DTS Monaco 9.02 Software
NOTE:
1. Disable anti-virus program before downloading.
2. You should have MB SD C4/C5 or VXDIAG Benz xentry software installed on a clean PC, otherwise keygen will refuse to open.
How to activate DTS 9.02 via keygen by yourself?
Step 1:Run DTS 9.02 keygen as administrator
Step 2: Clone this dialog
Step 3: Put your serial number and click generate
Where to get serial number/ID?
Find the DTS 9 root directory, open HWID text, copy and paste ID there.
Step 4: You will see your license file in the keygen folder
If failed to activate by keygen, we will activate it by teamviewer.
If anyone has problems with MB SD Connect C4/C4+ DoIP connection, check the voltage on the 8th leg of the OBD connector when the Doip connection is turned on, a voltage of 6.5V should appear
How to Check Mercedes MB STAR C4 devices using the DOIP protocol using a multimeter.:
VXDIAG Benz multiplexer works the same way.
For those who do not have voltage, we disassemble the C4 or C4 + device, we find the diode as in the photo (circled in red) and look at the value, if it is different, then change it to the one in photo 3, we also measure the voltage on the diode itself. All this applies only to devices where there is DOIP in the configuration.
old style C4 board
New SD C4+ board
Diode replacement.
solder the diode and everything after this before and after works great
The exchange of diagnostic information over Internet Protocol (DoIP) is performed using a standardized service interface as specified in the ISO14229-2 standard.
